A stunning pairing of pairing of our WRAS approved remote controlled electronic bidet seat (WRAS Approval Number: 1309335) exquisitely paired with a pure white floor standing back to the wall toilet bowl..
Please click image to be directed to the product page for full specification details and Installation guides.
Free U.K. delivery, an additional delivery charge of £39.95 will apply to areas of the U.K. considered remote by the delivery companies such as but not limited to the Highlands and Islands of Scotland and to Mainland Europe. (Please view more information by clicking the tab below for a list of locations considered "remote") Delivery in 2 ~ 7 days from receipt of order dependent on your location.
Free UK delivery in 2-5 days
International delivery available
GFS-7035: A combined electronic bidet seat and floor standing back to the wall toilet bowl.
True contemporary elegance and excellence in design. The is an exquisite combination of our WRAS approved remote controlled electronic bidet seat (WRAS Approval Number: 1309335) exquisitely paired with a pure white floor standing back to the wall toilet bowl. True contemporary elegance and excellence in design. Absolutely stunning!
Delivered in 2~7 working days from receipt of order dependent on your location, There is an additional charge of £39.95 to mainland Europe and for areas in the U.K. considered "Remote" by our courier, Please click for REMOTE AREA LOCATIONS
Connection piping to the sewerage waste system.
A concealed water cistern of your choosing. or you may be interested in purchasing this unit, click HERE to view details.
The seat requires a mains water supply of between 0.07 Mpa (0.7 bar) and 0.74 Mpa (7.4 bar) pressure. The inlet for the seat water supply is on the left facing the toilet pan.
A fully compliant power source to the seat (in U.K. to BS7671) and located within 1.5m of centre line of toilet (240V 50Hz 1.7Kw max) suggest located on the right facing pan.
Before Installing, if you have any doubts or require further technical information please call 01442 843120. Click HERE to view a video of the seat installation guide.
Made from germ-resistant plastic for maximum hygiene
Posterior cleansing with a variable spray
Variable spray (5 settings)
Adjustable wands position
Aerated water spray
“IIP” (Intensive Impulse Pulsation) function
“Auto” function (hygiene + dryer)
Jet type: continuous or with a variable flow for better cleansing action
Warm water with variable temperature setting (3 levels)
Heated seat with variable temperature setting (3 levels)
Warm air dryer with variable temperature setting (5 levels)
Continuous water heating
Intelligent energy saving function
Soft touch remote control
Side mounted supplementary buttons
Automatic cleaning of the wands before and after each use
Soft closing seat and lid
Touch activated on/off sensor to prevent over spray
Easy installation on existing toilets; Adaptable to most standard fixtures
Colour: Pure white
Power rating and energy consumption
Power rating: AC 230 V, 50 Hz
Energy consumption: 1660 - 1975 W
Electrical Safety Protection: 15 mA - GFCI
Degree of Protection: IP 24
Power cord length: 1.5 m
Intelligent energy saving function
Potable Water: Pressure 0.8 ~ 7.4 Bar / Atm
Heated Seat: Temperature Adjustable (3 levels) / 34 °C - 40 °C
Safety Device: Temp Fuse
Power Consumption: 55 ~ 65 W
Water temperature: Adjustable (3 levels) / 34 °C - 40 °C
Water Jet Flow: Adjustable (5 levels - max 750 ml/min)
Automatic start: deodoriser starts automatically when seat is occupied.
2 years manufacturers warranty
CE, WRAS, EMC, JET, Dentori, K, ISO9001
Please Note. To achieve full WRAS compliance an ‘Approved’ single check valve or some other no less effective back-flow prevention device providing back flow prevention protection to at least fluid category two must be fitted at the point of connection between the water supply and the water inlet to this appliance.