Product Description

VIS7000: A combined electronic bidet seat and Italian floor standing back to the wall toilet bowl.

True contemporary elegance and excellence in design. The is an exquisite combination of our WRAS approved elongated style bidet seat  (WRAS Approval Number: 1309335) exquisitely paired with a pure white floor standing back to the wall toilet bowl, designed and manufactured in Italy by one of Italy's premier sanitary manufacturers, True contemporary elegance and excellence in design. Absolutely stunning!

Delivered in 2~7 working days from receipt of order dependent on your location, There is an additional charge of £39.95 to mainland Europe and for areas in the U.K. considered by our courier, Please click for REMOTE AREA LOCATIONS

Installation Requirements

• A concealed water cistern of your choosing. or you may be interested in purchasing this unit, click HERE to view details.
• Connection piping to the sewerage waste system The seat requires a mains water supply of between 0.07 Mpa (0.7 bar) and 0.74 Mpa (7.4 bar) pressure. The inlet for the seat water supply is on the left facing the toilet pan.
• A fully compliant power source to the seat (in U.K. to BS7671) and located within 1.5m of centre line of toilet (240V 50Hz 1.7Kw max) suggest located on the right facing pan.
• Before Installing, if you have any doubts or require further technical information please call 01442 843746. Click HERE to view a video of the seat installation guide.

Key Features

• Made from germ-resistant plastic for maximum hygiene
• Posterior cleansing with a variable spray
• Feminine cleansing
• Variable spray (5 settings)
• Adjustable wands position
• Aerated water spray
• Kids function
• “IIP” (Intensive Impulse Pulsation) function
• “Auto” function (hygiene + dryer)
• Jet type: continuous or with a variable flow for better cleansing action
• Warm water with variable temperature setting (3 levels)
• Heated seat with variable temperature setting (3 levels)
• Warm air dryer with variable temperature setting (5 levels)
• Deodorizer
• Continuous water heating
• Intelligent energy saving function
• Soft touch remote control
• Side mounted supplementary buttons
• Automatic cleaning of the wands before and after each use
• Soft closing seat and lid
• Touch activated on/off sensor to prevent over spray
• Self diagnosis 
• Easy installation on existing toilets; Adaptable to most standard fixtures
• Colour: Pure white

Technical Specification:

     Power rating and energy consumption

• Power rating: AC 230 V, 50 Hz
• Energy consumption: 1660 - 1975 W
• Electrical Safety Protection: 15 mA - GFCI
• Degree of Protection: IP 24
• Power cord length: 1.5 m
• Intelligent energy saving function
• Potable Water: Pressure 0.5 ~ 7.4 Bar / Atm 

      Heated seat

• Heated Seat: Temperature Adjustable (3 levels) / 34 °C - 40 °C
• Safety Device: Temp Fuse
• Power Consumption: 55 ~ 65 W

     Hygiene

• Water temperature: Adjustable (3 levels) / 34 °C - 40 °C
• Water Jet Flow: Adjustable (5 levels - max 750 ml/min)
• Safety Device: Temp Fuse, Thermal switch, Floating switch
• Power Consumption: 1600 ~ 1905 W

     Warm air dryer

• Safety devices: Temp Fuse
• Power Consumption: 280 ~ 333 W
• Dryer temperature adjustment (3 levels)

     Deodoriser

• Automatic start: dedoriser starts automatically when seat is occupied.

     Warranty

•  2 years manufacturers warranty 

      International Certification

• CE, WRAS, EMC, JET, Dentori, K, ISO9001
• Please Note. To achieve full WRAS compliance an ‘Approved’ single check valve or some other no less effective backflow prevention device providing backflow prevention protection to at least fluid category two must be fitted at the point of connection between the water supply and the water inlet to this appliance.