Product Description

GWH-7235: Wall Hung Bidet Shower Toilet

A combination of pairing of our WRAS compliant electronic bidet seat exquisitely paired with a pure white modern wall-hung toilet bowl with concealed. Absolutely stunning!

Delivered in 2~7 working days from receipt of order depending on your location, There is an additional charge of £89.95 to mainland Europe and for areas in the U.K.  considered "Remote" by our courier, Please click for REMOTE AREA LOCATIONS

Installation Requirements

• A concealed wall frame and water cistern of your choosing, you may be interested in this wall frame and cistern combination, to view details click HERE
• Connection piping to the sewerage waste system
• The seat requires a mains water supply of between 0.07 Mpa (0.7 bar) and 0.74 Mpa (7.4 bar) pressure. The inlet for the seat water supply is on the left facing the toilet pan.
• A fully compliant power source to the seat (in U.K. to BS7671) and located within 1.5m of centre line of toilet (240V 50Hz 1.7Kw max) suggest located on the right facing pan.
• Before Installing, if you have any doubts or require further technical information please call 01442 843746 Click HERE to view a video of the seat installation guide.

1. Key Features

• Made from germ-resistant plastic for maximum hygiene
• Posterior cleansing with a variable spray
• Feminine cleansing
• Variable spray (5 settings)
• Adjustable wands position
• Aerated spray
• Kids function
• “IIP” (Intensive Impulse Pulsation) function
• “Auto” function (hygiene + dryer)
• Jet type: continuous or with a variable flow for better cleansing action
• Warm water with variable temperature setting (3 levels)
• Warm air dryer with variable temperature setting (5 levels)
• Deodoriser
• Continuous water heating
• Intelligent energy saving function
• Controls mounted on the side of the seat
• Automatic cleaning of the wands before and after each use
• Gentle closing seat and lid
• Touch activated on/off sensor to prevent over spray
• Self-check
• Easy installation
• Colour: Pure white

2. Warm air dryer

• Adjustable (5 levels)
• Power Consumption 280 ~ 333 W
• Safety devices: Temp Fuse

3. Heated Seat

• Heated Seat: Temperature Adjustable Off to (3 levels) / 34 °C - 40 °C
• Safety Device: Temp Fuse
• Power Consumption: 55 ~ 65 W

4. Deodorizer

• Automatic start: dedoriser starts automatically when the seat is occupied.

5. Safety

• Electricity Safety Protection: 15 mA - GFCI
• Temp Fuse
• IP24 rated

6. Materials

• Easy detachable: a convenient bracket plate provides easy attachment and detachment of the main body for an easy toilet cleaning.
• Soft-closing lid and seat: Function to make lid and seat open and close smoothly
• Easy lid removal: Lid is easy to install and remove for a perfect cleaning.
• Nanosilver technology: applied to the water tank and nozzles give them antibacterial properties.
• Ultrasonic waterproof soldering seat: It is easy to use with safety in a humid toilet room with the help of spinning design providing a waterproof function and preventing water drops from being soaked into.
• Antibacterial resins: Adapted antibacterial resin preventing colitis germs and sundry germs from being propagated.
• Toilet pan: pure white vitreous china

7. Power rating and energy consumption

• Power rating: AC 230 V, 50 Hz
• Energy consumption: 1660 - 1975 W
• Power cord length: 1.5 m
• Intelligent energy saving function
• Potable Water: Pressure 0.5 ~ 7.4 Atm

8. Warranty

• Electronic seat 2 years warranty parts and labour, K, ISO9001
• Toilet/cistern 2 years all parts

9. International Certification

• CE, EMC, JET, Dentori, K, ISO9001
• Please Note. To achieve full compliance an ‘Approved’ single check valve or some other no less effective back-flow prevention device providing backflow prevention protection to at least fluid category two must be fitted at the point of connection between the water supply and the water inlet to this appliance.