Product Description

NIC7000: A combined electronic bidet seat and Italian wall hung toilet bowl.

True contemporary elegance and excellence in design. The is an exquisite combination of our full specification elongated style electronic remote controlled bidet seat exquisitely paired with a pure white wall hung toilet bowl, designed and manufactured in Italy by one of Italy's premier sanitary manufacturers, True contemporary elegance and excellence in design. Absolutely stunning!

Delivered in 2~7 working days from receipt of order depending on your location, There is an additional charge of £39.95 to mainland Europe and for areas in the U.K. considered by our courier, Please click for REMOTE AREA LOCATIONS

Installation Requirements 

• A concealed wall frame and water cistern of your choosing, you may be interested in this wall frame and cistern combination, to view details click HERE
• Connection piping to the sewerage waste system
• The seat requires a mains water supply of between 0.07 Mpa (0.7 bar) and 0.74 Mpa (7.4 bar) pressure. The inlet for the seat water supply is on the left facing the toilet pan.
• A fully compliant power source to the seat (in U.K. to BS7671) and located within 1.5m of center line of the toilet (240V 50Hz 1.7Kw max) suggest located on the right facing pan.
• Before Installing, if you have any doubts or require further technical information please call 01442 843746. Click HERE to view a video of the seat installation guide.

Key Features

• Made from germ-resistant plastic for maximum hygiene
• Posterior cleansing with a variable spray
• Feminine cleansing
• Variable spray (5 settings)
• Adjustable wands position
• Aerated water spray
• Kids function
• “IIP” (Intensive Impulse Pulsation) function
• “Auto” function (hygiene + dryer)
• Jet type: continuous or with a variable flow for better cleansing action
• Warm water with variable temperature setting (3 levels)
• Heated seat with variable temperature setting (3 levels)
• Warm air dryer with variable temperature setting (5 levels)
• Deodorizer
• Continuous water heating
• Intelligent energy saving function
• Touch active remote control handset with wall dock
• Side mounted supplementary buttons
• Automatic cleaning of the wands before and after each use
• Soft closing seat and lid
• Touch activated on/off sensor to prevent over spray
• Self diagnosis 
• Easy installation on existing toilets; Adaptable to most standard fixtures
• Water connection on left side of the seat facing toilet, power cable connected center back of seat 
• Colour: Pure white

Technical Specification:

     Power rating and energy consumption

• Power rating: AC 230 V, 50 Hz
• Energy consumption: 1660 - 1975 W
• Electrical Safety Protection: 15 mA - GFCI
• Degree of Protection: IP 24
• Power cord length: 1.5 m
• Intelligent energy saving function
• Potable Water: Pressure 0.5 ~ 7.4 Bar / Atm 

      Heated seat

• Heated Seat: Temperature Adjustable (3 levels) / 34 °C - 40 °C
• Safety Device: Temp Fuse
• Power Consumption: 55 ~ 65 W

     Hygiene

• Water temperature: Adjustable (3 levels) / 34 °C - 40 °C
• Water Jet Flow: Adjustable (5 levels - max 750 ml/min)
• Safety Device: Temp Fuse, Thermal switch, Floating switch
• Power Consumption: 1600 ~ 1905 W

     Warm air dryer

• Safety devices: Temp Fuse
• Power Consumption: 280 ~ 333 W
• Dryer temperature adjustment (3 levels)

     Deodoriser

• Automatic start: dedoriser starts automatically when seat is occupied.

     Warranty

•  2 years manufacturers warranty ​

      International Certification

• CE, EMC, JET, Dentori, K, ISO9001
• Please Note. An ‘Approved’ single check valve or some other no less effective backflow prevention device providing backflow prevention protection to at least fluid category two must be fitted at the point of connection between the water supply and the water inlet to this appliance.